Panasonic SiriusXM CQ-RXBT490U, Service Manual

Page: 2 / 50

2
1 Service Navigation
1.1. About Lead Free Solder(PbF)
Distinction of PbF PCB
• PCBs(manufacture)using lead free solder will have a PbF
stamp on the PCB.
Caution
• Pb free solder has a higher melting point than standard sol-
der; Typically the melting point is 50 - 70
°
F (30 - 40
°
C)
higher. Please use a soldering iron with temperature control
and adjust it to 700 ± 20
°
F (370 ± 10
°
C). In case of using
high temperature soldering iron, please be careful not to
heat too long.
• Pb free solder will tend to splash when heated too high
(about 1100
°
F/600
°
C)
1.2. Laser Products
1.3. Replacing the Fuse
Use fuses of the same specified rating (15A). Using different
substitutes or fuses with higher ratings, or connecting the prod-
uct directly without a fuse, could cause fire or damage to the
stereo unit.
1.4. Maintenance
Your products is designed and manufactured to ensure a mini-
mum of maintenance. Use a dry, a soft cloth for routine exterior
cleaning. Never use benzine, thinner or other solvents.
1.5. Notes
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the fac-
tory.
[CD DECK BLOCK]
This model has no servo alignment points because microcom-
puter controls the servo circuit.
cqrxbt490u.book Page 2 Friday, April 6, 2012 9:48 AM