Panasonic SF4D-TM1 Page 59 User Manual Download

Page: 59 / 96

Functions

5-2-2 Parallel interference prevention specification (12-core cable)

The parallel interference prevention specification (12-core cable) is only for line synchronization.

The parallel interference prevention output wire (red) of the light curtain receiver is connected to

the parallel interference prevention input wire (gray / black) of a different light curtain emitter to

prevent mutual interference.

When the parallel interference prevention specification (12-core cable) is set, the function set

ting indicator (orange) of the light curtain receiver lights up.

CAUTION

● When set to the parallel interference prevention specification (12-core cable), the response time

is fixed at 14ms, regardless of the interference prevention wires.

● Parallel interference prevention is possible for up to a total of three sets. For details, refer to the

SF4D Series Instruction Manual

●

When parallel interference prevention is used and the master light curtain settings are read,

written, or initialized, or maintenance mode is turned ON, the slave light curtain control output

(OSSD 1 / 2) also turns OFF to ensure safety.

Master

Slave

Parallel interference

prevention output wire

(Red)

Parallel interference

prevention input wire

(Gray / Black)

When set to the parallel interference prevention specification (12-core cable), the following func

tions of the input / output wires change.

Terminal

No.

Lead wire

color

When "Standard specification"

is selected

When "Parallel interference prevention

specification (12-core cable)" is selected

Emitter

Gray / black

Application indicator input 2

Parallel interference prevention input

Receiver

Red

Auxiliary output 2

Parallel interference prevention output

When set to the parallel interference prevention specification (12-core cable), auxiliary output 1

of the light curtain emitter operates as indicated in the table below.

Summary of Contents for SF4D-TM1

































































































Search results

Summary of Contents for SF4D-TM1

Reviews:

Related manuals for SF4D-TM1

Brands by name

Popular brands

Panasonic SF4D-TM1, User Manual

Search results

Summary of Contents for SF4D-TM1

Reviews:

Related manuals for SF4D-TM1

Brands by name

Popular brands