manualshive.com logo in svg

Panasonic Section 700, User Manual

Share
Download
Panasonic Section 700 User Manual Download Page 279

Section 700 - Operation

Chapter 6. SLT Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  6-23

Direct Trunk Access

(All Versions)

Description

Extensions can access a specific trunk for outgoing calls. Extensions can also 
use Direct Trunk Access to test trunks or to access data trunks.

Operation

1.  Lift the handset. 

2.  Dial “88” followed by the desired trunk number (01-64).

3.  Dial the outside number.

4.  Replace the handset.

Do-Not-Disturb (DND)

(All Versions)

Description

An extension can be made unavailable by activating Do-Not-Disturb (DND). 
When DND is activated at an extension, calls to that extension receive busy 
tone.

Operation

To activate DND:

1.  Lift the handset. 

2. Dial 

“73.”

3.  Replace the handset.

DND is indicated by stutter dial tone followed by dial tone when you go 
off-hook.

Summary of Contents for Section 700











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands