108
ICX (International), March/1999
ICX-35-700
Chapter 4. User Maintenance
Section 700 - Operation
Set Text Message Replies
Description
This menu item specifies reply text messages.
Operation
To set Text Message Replies using either a large-display or small-display phone:
Action
Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT
displays
2. At the 81 level, enter 11.
3. Press the HOLD key.
8111-
Text Message
displays
4. Enter 1.
5. Press the HOLD key.
8111-1 :
Reply Message
displays
6. Press the HOLD key.
Enter Msg #
displays
7. Enter the Message number (0-9).
8. Press the HOLD key.
A B C D E F
X
displays (where X = Reply Text Message
number)
9. Enter the Text Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 92.)
Note: Press the FL/R key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired Text Message.
Note: Press the FL/R key to clear the entire entry.
12. Press the HOLD key to store the entry.
Next message number displays
