![background image](http://html.mh-extra.com/html/panasonic/sd-xc-wv-sfn480/sd-xc-wv-sfn480_operating-manual_277630103.webp)
IMPORTANT
•
When transmitting an H.264 image via a network, the transmitted image sometimes may not be
displayed depending on the settings of a proxy server or a firewall. In this case, refer to the network
administrator.
•
When two or more network interface cards are installed on the PC in use, the network interface
card(s) not used for receiving images should be invalidated when displaying images using the multicast
port.
*1
It is necessary to designate the unicast port number when “Unicast port (MANUAL)” is selected for “Transmission type”.
*2
It is necessary to designate the multicast IP address when “Multicast” is selected for “Transmission type”.
Operating Instructions
103
11 Configure the settings relating to images and audio [Image/Audio]