background image

R

QTX

00

14

27

Using 

the EZ Sync

TM

 “HD

A

V

I Contr

o

l

TM

You can select whether audio is output from the home theater system or 
the television speakers by using the television menu settings. For details, 
refer to the operating instructions of your television.

Home theater

Theater speakers are active.

When the home theater system is in standby mode, changing the 
television speakers to theater speakers in the television menu will 
automatically turn the home theater system on and select “AUX”

§

 or 

“D-IN”

§ 

as the source.

The television speakers are automatically muted.

You can control the volume setting using the volume or mute button on 
the TV’s remote control. (The volume level is displayed on the main 
unit’s FL display.)

To cancel muting, you can also use the home theater remote control 
(

page 10).

If you turn off the home theater system, television speakers will be 
automatically activated.

TV

Television speakers are active.

The volume of the home theater system is set to “0”.
– This function works only when “DVD/CD”, “AUX”

§

 or “D-IN”

§ 

is selected 

as the source on the home theater system.

Audio output is 2-channel audio.

When switching between the theater and television speakers, the TV 
screen may be blank for several seconds.

§ 

To toggle which input source the main unit will automatically switch to, 

press [SETUP] while the main unit is in “AUX” or “D-IN” mode.
– The default setting is “AUX”.

You can control the disc menus of the home theater system with the TV’s 
remote control when using the “DVD/CD” source. When operating the 
TV’s remote control, refer to the below illustration for operation buttons.

1

Select the theater operation menu by using the television menu 
settings.
(For details, refer to the operating instructions of your television.)

The home theater system will automatically switch to “DVD/CD” if it 

is in “AUX”

§

 or “D-IN”

§

 mode.

§ 

To toggle the mode that this function works with, press [SETUP] 
while the main unit is in “AUX” or “D-IN” mode.
–The default setting is “AUX”.

2

Select the desired item.

“TOP MENU”:

Shows a disc top menu 
(

page 15, 18) or program list (

page 19).

“MENU”:

Shows a disc menu (

page 15, 18) or play list 

(

page 19).

“Control Panel”:

The basic operations for discs are available.

[Note]

Depending on the menu, some button operations cannot be performed 
from the TV’s remote control.

“Control Panel” can be selected directly by using a button on the TV’s 
remote control (e.g. [SUB MENU]).

You cannot input numbers with the numbered buttons on the TV’s 
remote control ([0] to [9]). Use the home theater’s remote control to 
select the playlist etc.

Speaker control

EZ Sync Control only with TV’s remote 
control (for “HDAVI Control 2”)

ENTER/
PLAY

RETURN

EZ Sync

TOP MENU
MENU
Control Panel

PAUSE

PLAY

SKIP

SKIP

RETURN

STOP

0014En_p26-40.fm  Page 27  Friday, May 11, 2007  9:42 AM

Summary of Contents for SCPTX5 - DVD HOME THEATER SOUND SYSTEM









































Reviews: