Panasonic SC-HG1-C, User Manual, Page: 31 / 128

Installation and Settings
WUME-SCHG1C-4 3-9
3-3-3 Pin layout
DA
DA
DB
DB
DG
DG FG
SLD
SLD
FG
Host device
(or client device)
Client device
(or host device)
3-3-4 Host communication cable connection
● Make sure that the power supply is OFF while performing wiring work.
● For the communication cable, use a dedicated cable that is certified by CC-Link Partner
Association.
● The communication distance must be within the specified range.
● Do not set duplicate station numbers.
● The wiring interval between stations should be at least 200mm.
● For detailed connection specifications, refer to the installation manual published by the
CC-Link Partner Association.
<Station No.: 1> <Station No.: 2> <End unit>
CC-Link
host device
F.G. F.G. F.G.
DG SLD DA DB
Termination resistor (Note)
Termina-
tion resistor
(Note)
CC-Link dedicated cable wiring
Pin name Lead wire color
DA Blue
DB White
DG Yellow
SLD Shield
Note: Select a resistance for the termination resistors that is suitable for the cable, and connect to both end stations of
the line connection.
Obtain termination resistors separately.