Panasonic SC-HG1-C, User Manual, Page: 102 / 128

CC-LINK Network Communication
WUME-SCHG1C-4 4-68
4-14 Self-monitoring Function
Self-monitoring Function enables the sensor itself to judge various statuses (“normal status”,
“unstable detection status”, “caution-required status”, and “abnormal status”) within its own de-
vice and send the status information to the host device. HG-S series, and HG-T series sensors
incorporate the self-monitoring function.
The self-monitoring function is not supported by SC-HG1-C communication units manufactured in
November 2019 or earlier.
Use a SC-HG1-C communication unit manufactured in December 2019 or later.
4-14-1 Using the Self-monitoring Function
By combining the control system connected to PLC or PC via a network, this product, and the sensor( HG-S
series, HG-T series ) you can easily check the sensor status (normal, notification, caution, or fault).
The sensor itself judges even the causes of cautions and errors, making cause investigation easier.
PC, display units, indicators, and
other devices are used to notify
workers of sensor statuses
Sensor
Communication unit
Control device
PC Display unit Indicator
Status information from HG-S series,
HG-T series sensors is transmitted
to PLC or PC
Status information is trans-
mitted to SC-HG1-C accord-
ing to the judgment made by
the self-monitoring function
Sensor status can
be checked from
various devices
HG-S series
HG-T series
SC-HG1-C
PLC / PC