RQT9383
3
Getting started
Connection
75 Ω
FM
ANT
AM
ANT
LOOP
EXT
L
R
6 Ω
SPEAKERS (SB-HC7)
1
2
3
4
To household mains
socket
Compact stereo system
SC-HC7
Main unit
SA-HC7
Speakers
SB-HC7
■
About speakers
●
These speakers do not have magnetic shielding. Do
not place them near televisions, personal computers or
other devices easily influenced by magnetism.
●
Use only the supplied speakers. Do not use speakers
from other equipment.
●
The shape of right and left speakers is the same. You
can place them in either side.
●
Speaker nets can be removed.
Note
●
Do not use this unit continuously with a high volume.
The speaker characteristics may deteriorate or the speaker
life-span may be extremely shortened.
●
Turn down the volume in the following cases even in the
normal use. (Failure to do so may cause the speakers to be
damaged.)
•
When the sound is distorted
•
When you adjust the sound quality
Insertion of connector
Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing.
However there is no problem using the unit.
Connector
Appliance inlet
Approx. 6 mm
1
Connecting FM indoor antenna
Receive broadcast signals (
➡
page 12) after connection and
fix the end of the antenna using a tape at the least noisy
position.
●
Keep the antenna as far away as possible from the AC
mains lead and speaker cords.
2
Connecting AM loop antenna
Receive broadcast signals (
➡
page 12) after connection and
place the antenna at the least noisy position.
1
2
3
Use a Phillips-head
screwdriver, etc.
White
Black
Red
Click!
Stand the antenna up on
its base.
●
Use a screwdriver of 15 cm or longer. Do not screw too
tightly. Otherwise, the screwdriver goes around in circle and
cannot be
fi
xed.
3
Connecting speakers
■
Connecting speakers and speaker cords
Connect cords in the way that tag colours match the terminal
colours.
1. Put the cord on the hooks.
2. Pull out the cord from the chase.
●
Do not allow the speakers to step on the cords for connection.
chase
Bottom face of the speaker
●
Do not insert the vinyl parts.
hook
Blue
White
Note
●
Improper connection may cause the unit to malfunction.
●
Do not short-circuit speaker cords. Doing so may damage
circuits.
●
After connecting speakers, remove the protection film from
it’s top plate.
4
Connecting the AC mains lead
●
Connect the AC mains lead after all other connections are
complete.
READ THE CAUTION FOR THE AC MAINS LEAD
ON PAGE 2 BEFORE CONNECTION.
Note
●
Once the AC mains lead is connected, the unit may not be turned
on immediately even if you press the power button. Wait approx.
10 seconds to turn the unit on.
Caution for AC Mains Lead/Safety precautions
Connection
