Panasonic SC-HC395EG, Service Manual

Page: 17 / 100

17
8 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in this service
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use.
• Be sure to use proper service tools , equipments or jigs during repair.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Base Stand Unit
• Disassembly of Front Ornament Unit (L) & (R)
• Disassembly of Door Unit
• Disassembly of Door Base
• Disassembly of Front Panel Block
• Disassembly of Bridge P.C.B.
• Disassembly of Motor P.C.B.
• Disassembly of Gear Block & Arm Spring (Top)
• Disassembly of Arm Spring, Gear Assembly & Arm Assembly
• Replacement of Gear Base Assembly
• Replacement of Arm Assembly
• Disassembly of Cam Rail Top & Door Slider Top
• Disassembly of Cam Rail Bottom & Door Slider Bottom
• Disassembly of NFC P.C.B.
• Disassembly of SMPS Unit
• Disassembly of SMPS P.C.B.
• Disassembly of FL P.C.B. & Button Ornament Unit
• Disassembly of Button P.C.B.
• Disassembly of CD Mechanism
• Disassembly of CD Interface P.C.B.
• Disassembly of DAB Module and DAB Adapter P.C.B. (For HC397)
• Disassembly of Main P.C.B.
• Disassembly of Front Speaker (SP1)
• Disassembly of Front Speaker (SP2)
• Disassembly of Passive Radiator Unit (SP3)
• Disassembly of Passive Radiator Unit (SP4)
• Disassembly of Jack Lid
8.1. Service Fixture & Tools
Prepare service tools before process service position.
Ref. No. Service Tools Remarks
SFT1 Main P.C.B. (P5003) - CD Interface P.C.B. (CN7002) REE1978 (24P FFC)
SFT2 Main P.C.B. (CN1100) - SMPS P.C.B. (P1700) REX1538 (7P Wire)