Panasonic SC-HC05GN, Service Manual, Page: 45 / 69

45
Caution : During assembling, ensure the 2P Wire is dress-
ing properly onto the groove of the Line Filter Bracket.
Caution : During assembling, Line Filter P.C.B. is seated
properly onto the grooves of the Line Filter Bracket.
6.21. Disassembly Main P.C.B.
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of SMPS Unit”
• Refer to “Disassembly of Top Ornament Assembly”
Step 1 : Lift up the Himelons.
Step 2 : Detach 2P Wire (Speaker Wire R) at the connector
(CN301) on the Main P.C.B..
Caution : Replace the Himelons if they are torn during dis-
assembling.
Step 3 : Detach 2P Wire (Speaker Wire L) at the connector
(CN300) on the Main P.C.B..
Step 4 : Release the 2P Wire (Black & White) from the guides.
Caution : During assembling, ensure the 2P Wire (Speaker
Wire L) is dressing properly onto the guides as shown.