VQC8272
F0111SB0
1
2
1
2
3
4
1
FRONT
Lch
→
Tighten securely.
Easy Setting Guide
The order of setting
Prepare the speakers
Place the speakers
Refer to the rear label of the speaker before connecting the
corresponding cable.
Verify the type of speaker with the label on the rear of the
speaker.
Speakers
Front speakers
FRONT/AVANT
Centre speaker
CENTER/CENTRE
Surround speakers
SURROUND/AMBIOPHONIE
Blu-ray Disc
TM
Home Theater Sound System
Model No.
SC-BTT370
e.g.,
Prepare the
speakers
See below
Place the speakers
See below
Connect the
cables
See over
Turn on the
main unit
See over
Easy setup
See Easy setup screen
GREEN
GREY
C
RS
RED
R
WHITE
PURPLE
BLUE
LS
SW
L
Recommended
Front speakers
(L, R)
60
120
Surround speakers
(LS, RS)
Label each speaker cable by
attaching the numbered sticker
at the position indicated in the
illustration. Be sure to match the
number on each sticker with the
circled number in the illustration.
Connect the speaker cables.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker Lch
PUSH!
Front
speakers
Surround
speakers
Centre
speaker
Subwoofer
STEP 3
STEP 4
STEP 1
STEP 2
WHITE
White
Blue line
Leave about 110 mm
Thread the speaker cable through the base.
•
Use cables with a white connector and red
connector.
Front speaker
Base
speaker
Lch
WHITE
Rch
RED
Rch
GREY
GREEN
PURPLE
Press into the groove.
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
Lch
BLUE
PUSH!
: White
: Blue line
Pull the cable straight
along the line and slide into
the groove.
Back of the base
VQC8272̲eng.indd 2-3
VQC8272̲eng.indd 2-3
2011/01/11 19:12:09
2011/01/11 19:12:09
