- 16 -
8
Make sure the device is connected to your network.
≥
Enable Java and cookies in your browser settings.
∫
Network standby
This unit will turn on automatically from standby mode when you select the
unit as the output speakers.
≥
Network standby is normally active while the unit is connected to a network.
(Except when AUX is the audio source.)
≥
The power consumption in standby mode will increase when the network
standby is on. To reduce the power consumption in standby mode, turn off the
network standby.
To turn off the network standby
Touch and hold both [-WPS] and [VOL +] until the mode indicator
(amber) blinks twice.
≥
If the mode indicator blinks once, touch and hold both [-WPS] and [VOL +]
again until it blinks twice.
≥
To keep the network standby turned off, select AUX as the audio source
before switching the unit to standby mode.
≥
If this function is set to on, the network (wired LAN/Wi-Fi) remains active even
in standby mode.
– The power consumption in standby mode will increase.
≥
If this function is set to off, the network (wired LAN/Wi-Fi) is disabled in standby
mode.
– The network (wired LAN/Wi-Fi) will be enabled when the unit is turned on.
– The power consumption in standby mode will be reduced.
≥
If the network indicator is blinking in blue and red, wait until the blinking stops.
≥
When the unit is turned on by this feature, the beginning part of the music may
not be played back.
≥
Depending on the app, the conditions for activating this function may differ.
≥
The unit may not turn on even when selected as the output speakers. In that
case, start playback.
