Panasonic SA-PT160E Page 53 Service Manual Download

Page: 53 / 104

12.4.1.1. Adjustment procedure

1. While pressing STOP button on the main unit, press "5" on

the remote control unit.

2. Confirm that "J_xxx/yyy_zz" (display1/display2) is shown on

the front display.

For your information:

"yyy" and "zz" shown to the right have nothing to do with
the jitter value. "yyy" is the error counter, while "zz" is
the focus drive value.

Note:

Jitter value appears on the front display.

3. Play test disc T30 (center periphery).

4. Adjust tangential adjustment screw so that the jitter value is

minimized.

5. Play test disc T30 (center periphery).

6. Adjust tilt adjustment screw 1 so that the jitter value is

minimized.

7. Play test disc T30 (center periphery).

8. Adjust tilt adjustment screw 2 so that the jitter value is

minimized.

9. Repeat adjusting tilt adjustment screws 1 and 2 alternately

until the jitter value is minimized.

12.4.1.2. Important points

1. Make tangential adjustment first, and then make tilt

adjustment.

2. Repeat adjusting two or three times to find the optimum

point.

3. Finish the procedure with tilt adjustment.

Jitter value depends on the model:
1.

If the jitter value changes like B, the optimum point is easy to
find.

If the jitter value changes like A, set the optimum point near the
middle.

12.4.1.3. Check after adjustment

Play test disc or any other disc to make sure there is no picture
degradation in the inner, middle and outer peripheries, and no
audio skipping. After adjustment is finished, lock each
adjustment screw in position using screw lock.

12.4.1.4. Procedure for screw lock

1. After adjustment, remove top cover, tray, clamper base and

traverse unit in this sequence.

2. Lay the traverse unit upside down, and fix adjustment screw

with screw lock.

3. After fixing, reassemble traverse unit, clamper base, tray

and top cover.

12.4. Optical adjustment

12.4.1. Optical pickup tilt adjustment

Measurement point

Adjustment point

Mode

Disc

Tangential adjustment screw
Tilt adjustment screw

T01 (inner periphery) play
T30 (center periphery)
T43 (outer periphery) play

DVDT-S20 [SPG]

Measuring equipment

Adjustment value

None (Main unit display for servicing is used.)

Adjust to the minimum jitter value.

SA-PT160E / SA-PT160EB / SA-PT160EG

Summary of Contents for SA-PT160E









































































































Search results

Summary of Contents for SA-PT160E

Reviews:

Related manuals for SA-PT160E

Brands by name

Popular brands

Panasonic SA-PT160E, Service Manual

Search results

Summary of Contents for SA-PT160E

Reviews:

Related manuals for SA-PT160E

Brands by name

Popular brands