45
9 Service Position
Note: For description of the disassembly procedures, see the Section 8.
9.1.
Checking of Panel, Main and SMPS P.C.B.
Step 1
Place all P.C.B. on the insulated material as shown.
Step 2
Attach 10P FFC at connector (P1806) on Main P.C.B..
Step 3
Attach 10P FFC at connector (P5001) on Main P.C.B..
Step 4
Attach 24P FFC at connector (P5002) on Main P.C.B..
Step 5
Attach 6P Cable at connector (P1803) on Main P.C.B..
Step 6
Attach 22P FFC at connector (P1802) on Main P.C.B..
Step 7
Attach 9P Cable at connector (P1811) on Main P.C.B..
Step 8
Remove Fan Unit from Rear Panel Unit.
Step 9
Remove Fan Unit from chassis.
Step 10
Attach 2P Cable at connector (CN2104) on Main P.C.B..
Step 11
Attach 2P Cable at connector (CN2105) on Main P.C.B..
Step 12
Attach 13P Cable at connector (CN1851) on SMPS P.C.B..
Step 13
Attach 4P Cable at connector (CN6202) on Button R P.C.B..
Step 14
Attach 4P Cable at connector (CN6201) on Button L P.C.B..
Step 15
Panel, Main and SMPS P.C.B. can be checked as diagram shown.
Summary of Contents for SA-MAX3500PU
