http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s1006000000.html
10.6 Servo Process Display Mode
Each step can be monitored by a number assigned to each servo process during player initialization.
Following table shows each process applicable to displayed numbers.
Number Assigned to Servo Process
Processing Type
Processing Item
Details
Processing number
Initialization
Initialization
Operated after tray is loaded. (Transit to READY or PREPARE mode.)
0 ~ 4F
Secondary learning Performs servo learning for L1 layer of DVD-DL and 1 single speed of
CD-DA.
50 ~ 7F
Re- initialization Re-initialization
Each servo is turned on at READY mode by user.
80 ~ 9F
Seek
Seek
Optical pickup is moved to a designated position on the disc.
A0 ~ BF
Recovery
Recovery
(Error check)
Search during PLAY/SEEK mode
C0 ~ C4
(Action)
Error recovery according to attention error interruption sent from S-ODC.
C5 ~ C9
(Q-code read)
Reset and retry when Q-code cannot be read.
CA ~ CF
Stop
Stop
Disc operation completely stops as servo down according to user´s
operation.
F0 ~ FF
http://202.224.189.178/~sgml/viewing/SA-HT822VP/ALL/SVC/s1006000000.html9/3/2004 9:43:25 AM
