Panasonic SA-AKX220PN, Service Manual

Page: 12 / 73

12
4 Specifications
Q
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven) 225 W per channel (4
Ω
),
1 kHz, 30% THD (for AKX220)
325 W per channel (3
Ω
),
1 kHz, 30% THD (for AKX440)
Total RMS stereo mode power 450 W (for AKX220)
650 W (for AKX440)
Q
Tuner, terminals section
Preset memory FM 30 stations
AM 15 stations
Frequency modulation (FM)
Frequency range 87.5 MHz to 108.0 MHz
(100 kHz step) (for PN)
87.9 MHz to 107.9 MHz
(220 kHz step) (for PN)
87.50 MHz to 108.00 MHz
(50 kHz step) (for PS)
Antenna terminals 75
Ω
(unbalanced)
Amplitude modulation (AM)
Frequency range 520 kHz to 1710 kHz
(10 kHz step) (for PN)
522 kHz to 1629 kHz
(9 kHz step) (for PS)
520 kHz to 1630 kHz
(10 kHz step) (for PS)
AUX 1
Audio input Pin jack (1 system)
AUX 2 (for AKX440)
Sensitivity 100 mV, 4.7 k
Ω
Q
Disc section
Discs played (8 cm or 12 cm) CD, CD-R/RW (CD-DA, MP3*)
* MPEG-1 Layer 3
Pick up
Wavelength 790 nm (CD)
Q
USB section
USB Port
USB standard USB 2.0 full speed
Media file format support MP3 (*.mp3)
USB device file system FAT12, FAT16, FAT32
USB recording
Bit rate 128 kbps
USB recording speed 1x, 3x (CD only)
Recording file format MP3 (*.mp3)
Q
Internal memory section (for AKX440)
Memory
Memory size 4 GB
Media file format support MP3 (*.mp3)
Memory recording
Bit rate 128 kbps
Memory recording speed 1x, 3x (CD only)
Recording file format MP3 (*. Mp3)
Q
Bluetooth
®
section
Version
Bluetooth
®
Ver.2.1 + EDR
Class Class 2
Supported profiles A2DP, AVRCP, SPP, FTP
(for AKX220)
A2DP, AVRCP, SPP, OPP, FTP
(for AKX440)
Operating frequency 2.4 GHz band, FH-SS
Operating distance 10 m line of sight
Q
General
Power supply AC 120 V, 60 Hz (for PN)
AC 220 to 240 V, 50/60 Hz
(for PS)
Power consumption 53 W (for AKX220PN)
60 W (for AKX220PS)
86 W (for AKX440)
Dimensions (W x H x D) 348 mm x 193 mm x 251 mm
Mass 2.5 kg (for AKX220)
2.6 kg (for AKX440)
Operating temperature range 0
°
C to +40
°
C
Operating humidity range 35% to 80% RH
(no condensation)
Power Consumption in standby
mode (approximate) 0.3 W (for PN)
0.5 W (for PS)
Power Consumption in standby
mode (approximate)
(With "BLUETOOTH STANDBY" set
to "ON") 0.4 W (for PN)
0.6 W (for PS)
Note:
1. Specifications are subject to change without notice.
Mass and dimension are appropriate
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Q
System: SC-AKX220PN
Main Unit: SA-AKX220PN
Speakers: SB-AKX220PN
Q
System: SC-AKX220PS
Main Unit: SA-AKX220PS
Speakers: SB-AKX220PN
Q
System: SC-AKX440PN
Main Unit: SA-AKX440PN
Speakers: SB-AKX440PN
Q
System: SC-AKX440PS
Main Unit: SA-AKX440PS
Speakers: SB-AKX440PN