
50
Step 2: Remove 1 screw.
Step 3: Remove the Regulator Diode (D5803) from the Heat-
sink Unit C.
Caution: During replacement of the part, avoid touching
the heatsink, it may lead to injuries.
9.19.2.
Assembly of Regulator Diode
(D5803)
Step 1: Apply grease to the Heatsink Unit C.
Step 2: Mount & screw the regulator diode (D5803) to the Heat-
sink Unit C on SMPS P.C.B.
Caution: Ensure the Regulator Diode (D5803) is well tight-
ened to the Heatsink Unit C.
Step 3: Solder pins of the Regulator Diode (D5803) on the sol-
der side of SMPS P.C.B.
Caution: Ensure pins of the regulator diode (D5803) are
properly seated and soldered on SMPS P.C.B.
9.20. Disassembly of AC Inlet P.C.B.
• Follow (Step 1) to (Step 5) of Item 9.3
Step 1: Remove 1 screw.
Step 2: Release the tab at the rear panel as arrow show.
Step 3: Cut 2 tie wraps.
Summary of Contents for SA-AK180PN
