Panasonic S-LINK V, User Manual

Page: 64 / 182

64
Chapter 3
Wiring Check
Check before Starting
Before turning on the power of the
S-LINK V
system, be sure to check the following items:
● Check the wiring conditions of the controller and the control board.
● Check the PLC I/O connectors.
● Check the cable for short-circuit.
● Check the connected condition of the end unit.
Check of wiring conditions of controller and control board
● For a detailed description of the following controllers, refer to their respective user’s manuals.
SL-VGU1-C
,
SL-VGU1-D
:
SL-VGU1-C
/
SL-VGU1-D
User’s Manual
SL-VGU1-EC
:
SL-VGU1-EC
User’s Manual
SL-VGU1-485
:
SL-VGU1-485
User’s Manual
● For a detailed description of the control module, refer to the ‘
S-LINK V Control Module
Product Specifications
.’
● For a detailed description of the handy monitor, refer to the ‘
S-LINK V Handy Monitor In-
struction Manual
.’
NOTE
Visually check the terminals and connection cables (connection-to units) of the controller and the control board.
<SL-VCU1>
Pin No. Terminal name Connected to
1 G (BK) Black
Control cable
2 D (WH) White
3 0V (BU) Blue
4 +24V (BN) Brown
5 ERROR OUT 1
External control unit
6 ERROR OUT 2
7 READY
8 COM.
9 G (BK) Black
Transmission cable
10 D (WH) White
11 0V (BU) Blue
12 +24V (BN) Brown
13 F.G.
Controller power supply unit
14 F.G.
15 0V
16 +24V
<SL-VFP2, SL-VMEL-Q>
Pin No. Terminal name Connected to
1 F.G. Frame ground
2 +24V
External power input
3 0V
4 +24V Brown
Transmission cable
5 0V Blue
6 D White
7 G Black
<SL-VPCI>
Pin No. Terminal name Connected to
1 G Black
Transmission cable
2 D White
3 0V Blue
4 +24V Brown
5 0V
External power input
6 +24V
7 F.G. Frame ground
<SL-VVMES2>
Pin No. Terminal name Connected to
1 F.G. Frame ground
2 +24V
External power input
3 0V
4 +24V Brown
Transmission cable
5 0V Blue
6 D White
7 G Black