background image

Other

17

To remove the battery when disposing of this unit

• Disassemble after the battery runs out.
• Keep disassembled parts out of reach of children.

Regarding the handling of used batteries

• Insulate the terminals with adhesive tape or similar material.
• Do not disassemble.

Batteries

• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and 

windows closed.

• Battery mishandling can cause electrolyte leakage which can damage items the leaked fluid comes into 

contact with. If electrolyte leaks from the battery, consult your dealer. Wash thoroughly with water if electrolyte 
comes in contact with any part of your body.

• When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method 

of disposal.

1

Remove the right ear pad.

2

Remove the 4 screws and then the plate.

3

Remove the 2 screws and then the board.

4

Cut the cords coming out of the battery one by one.

5

Take out the battery.

The following instructions are not intended for repairing purposes but for the disposal of this unit. 
This unit is not restorable once disassembled.
• When disposing of this unit, take out the battery installed in this unit and recycle it.

1

2

3

4

5

Summary of Contents for RP-HF410





















Reviews: