Panasonic PX380G-BS300, Operating Instructions Manual

Page: 93 / 229

– 93 –
Chapter 4 Shooting — Handling setting data
Loading written user data
1
Select [LOAD] in the main menu → [OTHER FUNCTIONS] → [USER FILE].
The confirmation screen is displayed.
If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete.
2
Select [YES] and press the <SET> button (or the jog dial button).
Loading of the file begins.
How to use scene file data
The content of setting data can be written to and read written data from scene file area on the internal memory of the camera. Six types of scene files
can be registered. Use of this data allows you to quickly reproduce optimum setup states.
r Factory settings
[F1:]: File that is suitable for standard shooting.
[F2:FLUO.]:
The file suitable for shooting when the characteristics of fluorescent light should be considered (such as shooting indoors).
[F3:SPARK]: The file that sharpens the color hue and contrast and that has suitable resolution for SD shooting.
[F4:B-STR]: The file suitable for shooting when the tone level of darker areas are to be stretched (such as shooting at sunset).
[F5:CINE V]: The file suitable for shooting cinematic video that has shaper contrast.
[F6:CINE D]: The file suitable for shooting cinematic video that has wider dynamic range.
@ @
NOTE
t [SYSTEM MODE] does not change even if the scene file is changed. Set all items in the main menu → [SYSTEM MODE].
Saving scene file setting data to the camera memory
Fig. 1
1
Select a scene file to save in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI.
2
Select [SAVE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE]. (Fig. 1)
A confirmation screen is displayed.
3
Select [YES] and press the <SET> button (or the jog dial button).
The selected scene file is saved to the camera.
Loading the scene file saved in the camera
1
Select a scene file to load in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI.
2
Select [LOAD] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].
The confirmation screen is displayed.
3
Select [YES] and press the <SET> button (or the jog dial button).
The selected scene file is loaded from the camera.
Restoring the scene file setting data to the factory settings
1
Select the scene file to restore to the factory settings in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI and press the
<SET> button (or the jog dial button).
2
Select [INITIALIZE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].
The confirmation screen is displayed.