Panasonic PX380G-BS300, Operating Instructions Manual

Page: 65 / 229

– 65 –
Chapter 4 Shooting — Setting the electronic shutter
Setting the synchro scan mode
Perform the following steps to operate.
<SHUTTER> switch
Jog dial button
1
Press the <SHUTTER> switch from <ON> towards the <SEL> side to set the camera to synchro scan mode [S/S].
2
Change the setting value of the synchro scan shutter.
The setting value can be changed with the jog dial button while the synchro shutter indication displayed at the bottom of the screen is highlighted. At
this time, if the jog dial button is turned while pressing, the setting value of the shutter speed can be changed faster. Highlight disappears in several
seconds if the setting is not changed.
The shutter speed display in the synchro scan mode can be switched between seconds and angle in the main menu
→ [SCENE FILE] → [SYNC
SCAN TYPE].
Variable ranges in each mode
Mode Variable range
60P/60i 1/60.0 – 1/249.8
50P/50i 1/50.0 – 1/250.0
25P/25PN 1/25.0 – 1/250.0
30P/30PN 1/30.0 – 1/249.8
24PN 1/24.0 – 1/249.8
When [deg] is selected in the main menu → [SCENE FILE] → [SYNC SCAN
TYPE]
3.0d – 360.0d
f After the setting has been changed in the main menu → [SYSTEM MODE], the shutter speed may have been changed.
f If you set [deg] in the main menu → [SCENE FILE] → [SYNC SCAN TYPE], setting and display can be performed as in the shutter open angle.