Panasonic PX380G-BS300, Operating Instructions Manual

Page: 130 / 229

– 130 –
Chapter 6 Menu Operations — Setting menu display
3
Press the jog dial button (or the <SET> button).
f The confirmation screen is displayed depending on the menu item.
Select the process using the cursor buttons (
` / { / Y / I ), and press the <SET> button.
A checkmark is placed in front of the set item.
f In some menus, a screen for setting value is displayed on the menu screen (Fig. 3) or at the bottom of the screen (Fig. 4).
f In some menus, a message is displayed if a menu cannot be executed.
4
Press the <MENU> button to close the menu.
f This brings you back automatically to the previous screen depending on the menu item.
r
Performing cancellation while setting
1
Press the <EXIT> button while holding down the <SHIFT> button.
[MENU CANCEL BACK TO PREV] is displayed. (Fig. 5)
2
Press the <EXIT> button while holding down the <SHIFT> button.
The changed value returns to the value before being changed.
@ @
NOTE
t You will need to restart the camera if the number of lines and frequency setting of the system change.
Setting [USER MENU]
1
Select the main menu → [USER MENU SEL].
2
Select and display various items according to level.
3
Put checkmarks [ l ] on the items to be displayed in [USER MENU].
You can select menu items in each item or page. You can select up to 64 items.
Selected items are displayed on the main menu page or item in order.
Setting menu initialization
The values set in the setting menu are saved in the user file and scene file. Both the user file and scene file can be initialized to the factory settings.
Initializing user file (all items except for the scene file)
1
Select [INITIALIZE] in the main menu → [OTHER FUNCTIONS] → [USER FILE].
Initializing selected scene file
1
Select a scene file to initialize in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI.
2
Select [INITIALIZE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].
Initializing user file and all scene files simultaneously
1
Select the main menu → [OTHER FUNCTIONS] → [MENU INITIALIZE].
2
Select [YES].