Panasonic PV-500, User Manual

Page: 66 / 494

64
Se
tt
ing I
n
s
p
e
c
tio
n C
on
d
it
ions
C
h
ap
te
r 4
4.3.4 Setting Capturing Condition for Each Camera
Selecting Camera to Set
1.
Select "TYPE" > “Type Setting” from the
menu bar.
2.
Select "Camera".
Camera setting window is displayed.
3.
Select "Camera No. to Set".
Camera No. which can be used is displayed.
4.
Select the camera No. to set the capturing
condition.
The camera type set to the selected camera No. is displayed in “Connected Camera”.
When “Unused” is shown in “Connected Camera” field, change Camera setting of “Environment”.
Setting Shutter Speed
Specify shutter speed to suit for moving speed of the inspection object or lighting conditions. The shorter
shutter speed (the smaller value), the darker captured image. Adjust lighting illuminance or lens aperture as
necessary.
1.
Select the camera No. to set in “Camera” window.
2.
Select "Shutter Speed".
Now you can specify a value of shutter speed.
Range of shutter speed:
Except for Compact Gray Camera:0.03 - 1000.00 ms
0.3-Mega Compact Camera (Gray):0.10 - 500.00 ms
(default: 10.00)
3.
Select desired shutter speed.
To observe the image easily, set “Window Transparency (SETUP menu)” to a larger value.
On PV500 Ver.1.50 or older, the shutter speed is selected from the following values.
30μs, 100μs, 250μs, 500μs, 1ms, 5ms, 10ms, 50ms, 100ms, 500ms, 1000ms.
Adjusting Camera Gain
A camera is able to capture images by detecting
light from light receiving element in CCD or CMOS.
PV500 can use grayscale value between 0 through
255, but light receiving elements can capture
brightness with higher resolution.
"Camera Gain" is a parameter for converting
brightness captured by light receiving elements into
grayscale value.