Panasonic PV-500, User Manual

Page: 240 / 494

238
Se
tt
ing I
n
s
p
e
c
tio
n C
on
d
it
ions
C
h
ap
te
r 4
4.12 Totally Judging Results of Checkers (Judgement)
PV has a function that totally judges on the judgements of checkers and numerical calculations. Although 1000
Judgements are provided, No.0 to 999 (when 10 blocks are used), you can set maximum of 1000 expressions
per type combining with numerical calculations.
Judgement can be displayed on the screen and output to the external devices. In addition, images can be
saved according to the judgement and the images can be output to the external devices.
When the execution mode is set to “Automatic Switch”, the judgement is a branch condition. Refer to Chapter
4.4.3 (page 75) about the setting procedure of branch conditions.
4.12.1 Setting Judgement Conditions
Creating a Calculation
1.
Select "INSPECTION” > “Judgement”
from the menu bar.
“Judgement” window is displayed.
If [Judgement] is not displayed after
selecting [INSPECTION], tilt the ENTER key
to the right to show the hidden menus.
Yellow arrows shown in the submenu row
indicates that the menu is hidden.
2.
Select a type of Judgement to set by
[Type].
The list of the judgements that you selected is displayed.
Judgement has two types as below. Select them in accordance with your purpose.
JDC (External): The judgement result can be output to the external device.
JRC (Internal): The judgement results cannot be output to the external device. The other conditions
are the same as that of JDC (External).
Use JRC when computing a judgement which is not necessary to be output to the
external device.
Example:
As a precalculation of JDC (External)
As a condition to save images or to output images.
3.
Select a calculation list and a judgement number to set.
The screen of numerical calculation setting is displayed.
4.
Select the numerical calculation input field and press the ENTER key again.
The list of items that can be registered in a calculation is displayed.
Checker: Select this to input judgements of checkers including Position Adjustment and
Area Size Adjustment.
Operator:
Select this to input operators such as “AND” and “OR” to judge results totally.
Numerical Calculation: Select this to input a judgement of a numerical calculation.
Judgement JRC: Select this to input a judgement of JRC (Internal). (When you have set a
judgement of JRC, you can select only JRC with smaller number than currently
setting JRC.)
Judgement JDC: Select this to input judgement of JDC (External) with smaller number than
currently setting judgement number. (When you have set a judgement of JRC,
you cannot select JDC.)