Panasonic PV-500, User Manual

Page: 19 / 494

17
N
am
es
a
n
d
D
es
cr
ip
tio
n
s
C
h
ap
te
r 1
INDE
X
1.3 Keypad
Typical operations of the keypad are described below.
1 ENTER key Cursor Operation
To select the menu, input letters and
move the start and end points of areas.
Determination Operation
To determine the settings or select menu.
2 TRIG Key
(TRIGGER) To start an inspection or run a test.
3 CANCEL Key To return to the previous window or operation while setting.
4 F1 Key To display the image menu.
5 F2, F3 Key Use these keys when key guide is displayed in the bottom of the window.
6 OPE/SET Switch To switch windows between SETUP menu and RUN menu.
This is a snap type switch and the window switches every time you snap it.
7 FUNC Key
(FUNCTION) To display pop-up menu.
Pressing the key two seconds or more captures the screen. (Print Screen)
8 SHIFT Key
Use when
SHIFT
sign is shown on the screen.
Mainly, to make the cursor move faster combining with cursor operation.
9 LOCK Switch To lock or disable the 1 - 8 keys by setting in “LOCK” side.
The switch prevents undesired operation of the keys by mistake.
The operation from the keypad may be off on the PV500. Refer to page 334 for details.