ON(G)/STANDBY(R) indicator
The ON(G)/STANDBY(R) indicator informs you the status of the power. Confirm the status of the <ON(G)/STANDBY(R)>
indicator before operating the projector.
ON(G)/STANDBY(R) indicator
Indicator status
Status
Off
The power cord is unplugged.
Red
Lit
The power cord is plugged.
The [STANDBY MODE] is set to [ECO] when the projector is in standby mode and the
cooling is completed.
Blinking
The power is switched off (in standby mode). The [STANDBY MODE] is set to
[NETWORK].
*
1
The power is switched off (in standby mode). The [STANDBY MODE] is set to [NORMAL].
*
2
Orange
Lit
The projector is cooling down. The power is switched off after a while. (Changes to the
standby mode.)
Green
Lit
Projecting.
Blinking
The power is on and the lamp is not working. The [POWER MANAGEMENT] is set to
[READY].
*
3
The lamp starts work. The projector will project image after a while.
*
4
*1: The indicator will
light as the following order:
2.75 seconds (light) → 0.25 seconds (off) → 0.75 seconds (light) → 0.25 seconds (off)
*2: The indicator
will light as the following order:
2.75 seconds (light) → 0.25 seconds (off)
*3
: The indicator will light as the following order:
2.0 seconds (light) → 2.0 seconds (off)
*4
: The indicator will light as the following order:
0.5 seconds (light) → 0.5 seconds (off)
36 -
ENGLISH
Chapter 3 Basic Operations - Powering on/off
