Sound
50
- ENGLISH
Settings
Sound
Select [Sound] from the Main Menu (see
“Navigating through the menu” on page 35),
then select the item from the sub-menu.
Remote Control
Control Panel
Volume
Press ▲▼ to select [Volume] and then
1 )
Press the <SELECT> button.
Press ◄► to adjust the volume.
2 )
Press <SELECT> button to set the volume.
z
Operation
Adjustment
Adjustment
range
Press ►.
turn up the
volume
Maximum
value 63
Press ◄.
turn down the
volume
Minimum
value 0
You can also press </-> buttons on
z
the remote control or control panel to adjust the
volume.
Mute
Press ▲▼ to select [Mute] and then
1 )
Press the <SELECT> button.
Press the <SELECT> button to switch
2 )
the mute function [On]/[Off].
Press the <MUTE> button on the remote
z
control to temporarily turn off the sound. To turn
the sound back on, press the <MUTE> button
again or press the </-> buttons.
MIC
Press ▲▼ to select [MIC] and then
1 )
Press the <SELECT> button.
Press ▲▼ to switch the [MIC] function
2 )
[On]/[Off].
When [Off] is selected in [MIC] function, the [MIC
z
gain] and [Standby MIC out] functions are not
available.
Connect the computer 2 audio input signals to
z
COMPUTER AUDIO IN 1 terminal as Sound
function is set to Computer 2 and MIC function
is turned on.
If the [MIC] function is turned on when
z
connecting PC audio to the AUDIO IN (a mini
jack), loud sound may be output suddenly
depending on the setting value of [MIC gain].
MIC gain
Press ▲▼ to select [MIC gain] and
1 )
then Press the <SELECT> button.
Press ◄► to adjust the MIC mixing
2 )
gain.
Press <SELECT> button to set the [MIC gain].
z
Operation
Adjustment
Adjustment
range
Press ►.
turn up the MIC
mixing gain
Maximum
value 63
Press ◄.
turn down the
MIC mixing gain
Minimum
value 0
Standby MIC out
Press ▲▼ to select [Standby MIC out]
1 )
and then Press the <SELECT> button.
Press ▲▼ to switch the [Standy MIC
2 )
out] function [On]/[Off].
When setting the [Standby MIC out] function
z
to [On] and in Standby mode status, only
[MIC] input volume can be output. Press the
</-> buttons on the control panel or
on the remote control to adjust the MIC input
volume.
Only the Standby mode is set to [Network],
z
[Standby MIC out] can be selected.
