Basic operations by using the remote control
ENGLISH -
33
Basic Operation
Using the
AV MUTE function
button
Press the < AV MUTE> button on the remote control
to black out the image. To restore to normal, press the
< AV MUTE> button again or press any button.
The screen changes each time you press the
z
< AV MUTE> button as follows.
Note
When use the <MUTE> button to release the [
z
AV mute]
function, the mute function can not be operated at the
same time.
Using the P-TIMER button
Press the <P-TIMER> button on the remote control to
operate the Count up/Count down function.
button
Press <P-TIMER> button on the remote
control.
Note
To stop the count time, press the <P-TIMER> button.
z
To cancel the [P-timer] function, press and hold the
<P-TIMER> button. (
Æ
page 54)
Using the LAMP button
This function allows you to select the lamp mode for
changing the brightness on the screen.
button
Press <LAMP> button on the remote
control.
Note
For details, see “Lamp Power” of "Setting" under Main
z
menu. (
Æ
page 55)
Using the D.ZOOM buttons
This function allows you to enter to the Digital zoom
+/– mode.
buttons
Press <D.ZOOM ▲/▼> buttons on the
remote control.
Note
For details, see "Screen" of Main menu. (
z
Æ
page 47)
Controlling the volume of the
speaker
You can control the volume of the projector’s speaker
or audio output.
buttons
Press the </–> buttons on the control panel
or on the remote control to adjust the volume. The
volume dialog box appears on the screen for a few
seconds.
Note
For details, see “Volume” of "Sound" under Main menu.
z
(
Æ
page 50)
black out
projected image
