Network
68
- ENGLISH
Settings
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, gateway and
z
DNS, ask the network administrator
.
A wired LAN and wireless LAN can not be used in the
z
same segment.
Wireless LAN
You can set the network number.
Press ▲▼ to select [Wireless LAN],
1 )
and press <ENTER> or ► button.
Select the number to be connected
2 )
with the ▲▼ buttons.
Network number [Off], [S-DIRECT],
z
[M-DIRECT], [S-MAP], [1]-[4], [User 1]-
[User 3]
Note
Selecting [Off] disables the wireless LAN.
z
Network number: [S-DIRECT], [S-MAP] and [1]-[4] are
z
available only when connecting via wireless LAN with
the application software the “Wireless Manager mobile
edition 6.0”. For details, refer to the operation manual of
the “Wireless Manager mobile edition 6.0”.
Network number: [USER 1]-[USER 3] can be changed in
z
[Wireless detailed setup] menu. (
Æ
page 68-71)
Wireless detailed setup
You can configure more precise network settings, if
you select [M-DIRECT] or [USER1]~[USER3] (user)
for [Wireless LAN] in the network menu. For network
settings, contact your network administrator.
Configuration of Wireless LAN
[M-DIRECT]
Even if there is no access point, you can still
connect the projector to computer via the
infrastructure. In addition, the connection with
the iPad / iPhone / iPod touch is much easier. For
details, please refer to [Sending image from iPad /
iPhone / iPod touch]. (
Æ
page 71)
Press ▲▼ to select [Wireless detailed
1 )
setup], and press <ENTER> button.
Press ▲▼ to select an item, and
2 )
change the setting according to the
instructions.
IP Address
(Displaying and
setting the IP address)
Enter the IP address.
Subnet Mask
(Displaying and
setting the subnet
mask)
Enter the subnet mask.
SSID
(Displaying and
setting the SSID)
Select M-DERECT in
Wireless LAN, then the
SSID can be set.
Channel
Select M-DERECT in
Wireless LAN, then the
Channel can be set.
Select a channel for the
access point (
Æ
page
21).
Key
Select M-DERECT
in Wireless LAN,
then the KEY can
be set. Setting a key
for the access point.
Input either 8 to 63
alphanumerics or a
64 digit string in the
hexadecimal format.
“Glossary” (
Æ
page
117 – 118)
Press ▲▼◄► to select [SET], and
3 )
press <ENTER> button.
The current setting of network will be saved.
Note
After the configuration is completed, you must select
z
[SET] and press the <ENTER> button. At this time, if you
select [Cancel], You will cancel the setting change.
Default settings of
[M-DIRECT]
The following settings as [M-DIRECT] in the
wireless LAN are set before the projector leaves
the factory.
IP Address
192.168.12.100
Subnet Mask
255.255.255.0
SSID
M- The last 4 digits
of the projector ID
Channel
1
Key
The same string as the SSID
Note
The authentication method is WPA2-PSK, and the
z
encryption method is AES. Both methods are fixed.
When you need to change initial configuration of
z
[M-DIRECT], please contact your network administrator.
Make sure the initial Key is changed for safety.
z
As the DHCP server is already functioning, select [ON]
z
before connecting a computer.
Configuration of Wireless LAN
[USER1]~[USER3]
Press ▲▼ to select [Wireless detailed
1 )
setup], and press <ENTER> button.
