Network
ENGLISH -
63
Settings
DHCP
(DHCP client
function)
On:
If a DHCP server
exists in the
network to which
the projector is
connected, the
IP address will
automatically be
acquired.
Off:
If a DHCP
server does
not exist in the
network to which
the projector
is connected,
additionally set
[IP address],
[Subnet mask
] and [ Default
gateway
].
IP address
(Displaying and
setting the IP
address)
Enter the IP address
if DHCP server is not
used.
Subnet mask
(Displaying and
setting the subnet
mask)
Enter the the Subnet
mask if not using a
DHCP server.
Default gateway
(Displaying
and setting the
gateway address)
Enter the gateway
address if DHCP server
is not used.
DNS1
(Displaying
and setting the
preferred DNS
server address)
Enter the DNS server
address if DHCP server
is not used.
DNS2
(Displaying
and setting the
alternate DNS
server address)
Enter the alternate DNS
server address if DHCP
server is not used.
Mode
[No link], [DIGITAL LINK], [LPM] or
[Ethernet] appears
HDMI status
[NO HDMI], [HDMI ON] or [HDCP
ON] appears.
The color of [Signal quality] will change to red, yellow
or green depending on the maximum and minimum
data of the ERROR value.
Signal quality
Color
Status
less than -12 dB
Green Normal signal received
-11 ~ -8 dB
Yellow Part of the received data
destroyed
more than -7 dB
Red
Abnormal signal received
Projector name
You can change the projector name to be displayed
on the network.
Press ▲▼ to select [Projector name],
1 )
and press <ENTER> button.
Select characters with the ▲▼◄►
2 )
buttons and press the <ENTER>
button to enter the projector name.
Select [BS] to delete one character selected
with the cursor in the input box and press the
<ENTER> button.
Select [Set] with the ▲▼◄► buttons
3 )
and press the <ENTER> button.
Select [Cancel] to undo the changes and then
press the <ENTER> button.
Select [Yes] or [No] with the ▲▼
4 )
buttons and press the <ENTER>
button.
Note
[Name
z
□□□□
] (
□□□□
is four-digit number) is set
before the projector leaves the factory.
Network setup
You can make detailed wired LAN settings.
Press ▲▼ to select [Network setup],
1 )
and press <ENTER> button.
Press ▲▼ to select an item, and
2 )
change the setting according to the
instructions.
Press ▲▼◄► to select [Set], and press
3 )
<ENTER> button.
Default wired LAN settings
z
The following settings are set before the
projector leaves the factory.
DHCP
Off
IP address
192.168.10.100
Subnet mask
255.255.255.0
Default gateway
192.168.10.1
DNS1/DNS2
NONE
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, gateway and
z
DNS, ask the network administrator
.
