Setting
60
- ENGLISH
Settings
RS232C
Switch the sending and receiving port of the serial
command.
Press ▲▼ to select [RS232C] and then
1 )
press the <ENTER> button.
Press ▲▼ to switch the item.
2 )
Serial
For the projector SERIAL IN
terminal.
DIGITAL LINK
For the Digital Interface Box
SERIAL IN terminal (Optional
accessory: ET-YFB100G) .
Note
When [DIGITAL LINK] is selected, the signal can
z
only be transmitted when connects the <DIGITAL
LINK> jack of the projector to the SERIAL terminal
of the connected equipment, such as the Digital
Interface Box (Optional accessory: ET-YFB100G).
When you want to transfer the logo via Digital
z
Interface Box (ET-YFB100G), [NO SIGNAL SLEEP]
should be set to [Off] for the communication will be
not interrupted.
Computer
Projector
Serial connection example for
Digital interface box
LAN cable
(straight)
Digital interface box (ET-YFB100G)
Communication
cable
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing
faults.
Press ▲▼ to select [Warning log].
1 )
Press ► or the <ENTER> button to
2 )
display the latest warning message.
Up to 10 warning logs are displayed with the
z
latest warning message at the top of the list,
followed by previous warning messages in
chronological order.
Attention
When the Factory default function is executed, all
z
the warning log records will be deleted.
Factory default
This function returns all setting values except for [PIN
code lock], [Logo PIN code lock], [Lamp power], [Filter
counter] and all of the network settings to the factory
default settings.
Press ▲▼ to select [Factory default].
1 )
Press the <ENTER> button.
2 )
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another confirmation dialog
box appears, select [Yes] to return to [Factory
default].
