Setting
ENGLISH -
59
Settings
Press ▲▼ to set the Timer.
2 )
Select from (Off/1000H/2000H/3000H/40
z
00H/5000H/6000H) depending on the use
environment.
Filter counter reset
J
After replacing the filter, be sure to reset the timer.
Press ▲▼ to select [Filter counter
1 )
reset].
Press the <SELECT> button.
2 )
[Filter counter Reset?] appears. Select Yes
z
to continue. Another confirmation dialog box
appears, select Yes to reset the Filter counter.
Total power savings
This function displays the saved amount of power and
the exhausted CO2 of the projector.
Press ▲▼ to select [Total power
1 )
savings] and then press the <SELECT>
button.
Show the total accumulated power savings of
z
the projector and display the total amount of
CO2 exhausted from the projector.
Press the <SELECT> button to reset
2 )
the figures of the total power savings
and the exhausted
CO2.
[Total power savings Reset?] appears. Select
z
Yes to continue. Another confirmation dialog
box appears, select Yes to reset the Total power
savings.
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing
faults.
Press ▲▼ to select [Warning log].
1 )
Press ► or the <SELECT> button to
2 )
display the latest warning message.
Up to 10 warning logs are displayed with the
z
latest warning message at the top of the list,
followed by previous warning messages in
chronological order.
Attention
When the Factory default function is executed, all
z
the warning log records will be deleted.
Factory default
This function returns all setting values except for the
User logo, PIN code lock, Logo PIN code lock, Lamp
counter and Filter counter and Total power savings to
the factory default settings.
Press ▲▼ to select [Factory default].
1 )
Press the <SELECT> button.
2 )
[Return to Factory default?] appears. Select Yes
z
to continue. Another confirmation dialog box
appears, select Yes to return the Total power
savings.
