Powering ON/OFF
28
- ENGLISH
Basic Operation
Complete peripheral connections (with a
1 )
computer, VCR, etc.) before turning on the
projector.
Connect the projector’s AC power cord into an
2 )
AC outlet. The POWER indicator lights red.
Open the lens cap.
Press the <ON/STAND-BY> button to on the
3 )
control panel or on the remote control. The
POWER indicator lights green and the cooling
fans start to operate. The preparation display
appears on the screen and the count down
starts.
After the countdown, the input source that was
4 )
selected the last time and the lamp power status
icon appear on the screen.
If there is no signal input when start on the
5 )
projector, or the current signal is missed while
operating the projector, the Video/PC selection
window will be displayed on the screen, please
move the pointer to input source desired
by pressing the Press ▲▼ and press the
<SELECT> button. And then follow the input
signal guidance window to correct the signal and
connection.
If the projector is locked with a PIN code, PIN
code input dialog box will appear. Enter the PIN
code as instructed on the next page.
Note
When the Logo select function is set to Off, the logo will
z
not be shown on the screen (
Æ
page 53).
When Countdown off or Off is selected in the Display
z
function, the preparation display will not be shown on the
screen (
Æ
page 53).
When the Input search function is set to On 2, the input
z
signal will be searched automatically (
Æ
page 52).
Turing On the Projector
(2)
(3)
(3)
Video/Computer selection
06
Selected Input Source and Lamp
power
Lamp power status
The preparation display will disappear
after 30 seconds
.
06
