LAN
ENGLISH -
43
Settings
Select [LAN] from the Main Menu (see “How to
operate menu” on page 31) and then select the
item from the Sub Menu.
Note
The following settings are set before the projector leaves
z
the factory.
DHCP
Off
IP Address
192.168.10.100
Subnet Mask
255.255.255.0
Gateway
192.168.10.1
DNS
0.0.0.0
If you want to use a DHCP server, please make sure that
z
the DHCP server is enabled.
For more information about the IP Address, Subnet
z
Mask, Gateway, and DNS, please contact your network
administrator.
DHCP
Set whether to use DHCP server.
Press ▲▼ to select [DHCP].
1 )
Press ► to display the setting dialog
2 )
box.
Press ▲▼ to switch [On]/[Off].
3 )
Press <MENU> button to exit the switching and
z
go back to the previous menu.
Press ► to confirm.
4 )
After selecting [On], the message about LAN
z
restarting will be displayed. The setting of
DHCP finishes when the message disappears.
Press <MENU> to exit.
5 )
On
The projector will acquire the IP
address automatically.
Off
User must set the [IP Address],
[Subnet Mask], [Gateway] and
[DNS] manually.
IP Address
Select an IP Address of projector connected to
network.
Press ▲▼ to select [IP Address].
1 )
Press ► to display the setting dialog
2 )
box.
Press ▲▼◄► to input digit numbers.
3 )
Press <MENU> to exit.
4 )
Subnet Mask
Select Subnet Mask of projector for network
connection.
Press ▲▼ to select [Subnet Mask].
1 )
Press ► to display the setting dialog
2 )
box.
Press ▲▼◄► to input digit numbers.
3 )
Press <MENU> to exit.
4 )
Gateway
Select Gateway of projector for network connection.
Press ▲▼ to select [Gateway].
1 )
Press ► to display the setting dialog box.
2 )
Press ▲▼◄► to input digit numbers.
3 )
Press <MENU> to exit.
4 )
DNS
Select DNS of projector for network connection.
Press ▲▼ to select [DNS].
1 )
Press ► to display the setting dialog
2 )
box.
Press ▲▼◄► to input digit numbers.
3 )
Press <MENU> to exit.
4 )
LAN
PT-TW330
