Basic operations by using the remote control
30
- ENGLISH
Basic Operation
Using the KEYSTONE button
This function allows you to correct keystone distortion.
button
Press the <KEYSTONE> button on the remote control
or on the control panel. The Keystone dialog box
appears. Press ▲▼ to correct keystone distortion.
The keystone adjustment can be stored
(
Æ
page 45)
.
Operation
Screen image
Reduce the
upper width
with press
▲
.
Reduce the
lower width
with press
▼
.
Note
The white arrows indicate that there is no correction.
z
A red arrow indicates the direction of correction.
z
An arrow disappears at the maximum correction.
z
If you press the <KEYSTONE> button on the remote
z
control or on the control panel once more while the
keystone dialog box is being displayed, the keystone
adjustment will be canceled (
Æ
page 45).
The adjustable range is limited depending on the input
z
signal.
Using the INFO. button
This function allows you to display the information
menu.
button
Press <INFO.> button on the remote
control.
Note
For details, see “Input Source Information Display ” in
z
“Information” under Main menu (
Æ
page 56).
Using the FREEZE function
You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
button
Press the <FREEZE> button on the remote control to
freeze the picture on the screen, meanwhile, volume
is muted. To cancel the Freeze function, press the
<FREEZE> button again or press any other button.
Fig.1 will appear on the screen while the Freeze
function is working.
Fig.1
Note
When no signal inputs, mark will appear.
z
Using the IMAGE button
This function allows you to select a desired image
mode of the screen.
button
Press <IMAGE> button on the remote control to select
the desired image mode among [Dynamic], [Standard],
[Real], [Cinema], [Blackboard (Green)], [Colorboard],
[Image 1], [Image 2], [Image 3] and [Image 4].
Note
For details, see “Image select” of Main menu.
z
(
Æ
page 40)
Using the MUTE button
Press this button on the remote control to select [On]
to temporarily turn off the sound.
button
Press <MUTE> button on the remote
control.
Note
To turn the sound back on, press this button again to
z
select [Off] or press the </–> buttons.
(
Æ
page 47)