Options
44
- ENGLISH
Settings
Lamp Power Mode
J
Selects desired lamp power mode under
z
different situations.
Press ▲▼ to select [Lamp Power Mode].
1
)
Press ► to display the setting dialog box
.
2
)
Press ◄► to select the desired item.
3
)
Normal
Normal brightness.
AUTO
The brightness level of the content is
automatically detected to significantly
reduced lamp power consumption
during periods of inactivity.
ECO1 /
ECO
*
1
Lower brightness reduces the lamp
power consumption and extends the
lamp life.
ECO2
*
1
Lowest brightness reduces the lamp
power consumption and extends the
lamp life.
*1:
Normal / AUTO / ECO1 / ECO2 for PT-LX351EA.
Normal
/
AUTO
/
ECO for
PT-LW321EA / PT-
LW271EA / PT-LX321EA / PT-LX271EA.
Note
When there is no signal for more than 5 minutes, the
z
lamp power will be decreased automatically for power
saving.
Clear Lamp Hours
J
Reset the lamp usage time after replacing the
z
lamp unit.
Press ▲▼ to select [Clear Lamp Hours].
1
)
Press ► to display the setting dialog box
.
2
)
Press
3
)
▲▼ to switch [Yes]/[No].
Press ► to execute.
4
)
High Altitude
Set to [On] when the projector is used at elevation
approx. 1 000 m (3 300 ft) and approx. 3 000 m
(10 000 ft).
Press ▲▼ to select [High Altitude].
1
)
Press ► to display the adjustment
2
)
dialog box
.
Press ◄► to switch [On]/[Off].
3
)
On
For the elevation approx. 1 000 m
(3 300 ft) and approx. 3 000 m
(10 000 ft).
Off
For the elevation below approx.
1 000 m (3 300 ft).
Note
When [On] is selected, the speed and the noise of the
z
fan will increase.
Dust Filter Reminder
Set the cleaning cycle of the filters and reset the use
time of the filters.
Press ▲▼ to select [Dust Filter
1
)
Reminder].
Press ► to display the setting dialog box.
2
)
Filters Remind (Hour)
J
Set the timer to display the Dust Filter Reminder
z
message
(
Æ
page 53).
Press ▲▼ to select [Filters Remind
1
)
(Hour)].
Press ► to display the adjustment
2
)
dialog box.
Press ◄► to set the time.
3
)
The factory default is 0 hour.
z
You can set the time in 50 hours intervals and
z
the longest set time is 1 000 hours.
Cleaning up Reminder
J
Reset the air filter used time to zero.
z
Reset the air filter hour counter after cleaning
z
or replacing the dust filter.
Press ▲▼ to select [Cleaning up
1
)
Reminder].
Press ► to display the setting dialog box.
2
)
Press ▲▼ to switch [Yes]/[No].
3
)
Press ► to execute.
4
)
Note
It is recommended to clean the air filters regularly every
z
500 hours of usage.
Information
Displays the input signal source and setting state
information of the projector.
Press ▲▼ to select [Information].
1
)
Press ► to display the information
2
)
dialog box
.
Displays [Model Name], [Source], [Resolution],
z
[Software Version], [Color Space] and [Aspect
Ratio].
