Panasonic PT-LB55, Operating Instructions Manual

Page: 47 / 72

E
NGLISH
-47
Adjustments
and
settings
RESIZING
(S-VIDEO/VIDEO/RGB/YP
B
P
R
only)
This should normally be set to “ON”.
(This setting is only for signals
which have lower resolutions than
the LCD panels. Refer to page 68
for details.)
ON
The pixel resolution of the input
signal is converted to the same
resolution as the LCD panels before
being projected.
This may sometimes cause
problems with the quality of the
picture.
OFF
The input signal is projected at its
original resolution, with no pixel
conversion. The projected picture
will be smaller than normal, so
adjust the zoom setting or move the
projector forwards or backwards to
adjust the picture size if necessary.
If set to “OFF”, some features, such
as “DIGITAL ZOOM”, “REALTIME
KEYSTONE”, “KEYSTONE” or
“INDEX WINDOW” will not function.
FRAME LOCK
(RGB only)
If the picture’s condition is bad while
an RGB moving picture is projected,
set “FRAME LOCK” to “ON”. Refer
to page 68 for compatible RGB
signals.
NOTE:
B If using this projector in places
such as cafes or hotels to
display programmes for a
commercial purpose or for
public presentation, note that if
the aspect ratio (16:9)
selection function is used to
change the aspect ratio of the
screen picture, you may be
infringing the rights of the
original copyright owner for
that programme under
copyright protection laws.
B If a 4:3 picture is projected
onto a 16:9 screen, distortion
may occur around the edges of
the picture so that part of the
picture is no longer visible.
Programmes which have 4:3
aspect ratios should be viewed
in 4:3 mode to give proper
consideration to the aims and
intentions of the original
programme’s creator.