DIS-4
SECTION 2 DISASSEMBLY PROCEDURES
2. Mechanical and Electrical Parts Disassembly
2.1. Disassembly flow chart
* Before Disassembly the projector, turn off the POWER switch and disconnect the power plug from the wall outlet.
* To assemble, reverse the disassembly procedures.
* When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
2.14. Intake duct assy removal
Cable reforming
2.12. Fans (FN906, FN909, FN910) removal
2.11. [S]-P.C.Board assy removal
2.10. Lamp house, thermal fuse removal
2.9. Exhaust and lamp fans removal
2.6. [V]-P.C.Board, [A]/[J]-P.C.Board assy removal
2.4. Lamp and lamp cover removal
2.3. Air filter, filter cover removal
Completed Product
Summary of Contents for PT-EZ770Z
Page 8: ...8 PREFACE...