Panasonic PT-EW530E Operating Instructions Manual Download

Page: 17 / 118

Precautions for Use

ENGLISH -

Important

Information

Attention

After unpacking the projector, discard the power cord cap and packaging material properly.

For lost accessories, consult your dealer.

The part numbers of accessories and separately sold components are subject to change without notice.

Store small parts in an appropriate manner, and keep them away from young children.

Contents of

CD-ROM

The following contents are stored on the supplied CD-ROM.

Instructions/List (PDF)

Software



Operating Instructions – Functional Manual



Operation Manual Multi Projector Monitoring &

Control Software 2.6



Operation Manual Logo Transfer Software 2.0



List of compatible projector models

This is a list of projectors that are compatible with

•

the software (refer to the right column), and their

restrictions.



Multi Projector Monitoring & Control

Software 2.6 (Windows)

This software allows you to monitor and control

•

multiple projectors connected to the LAN.



Logo Transfer Software 2.0 (Windows)

This software allows you to create original

•

images, such as company logos to be displayed

when projection starts, and transfer them to the

projector.

Optional accessories

Options

Model No.

Ceiling Mount Bracket

ET-PKE200H (for high ceilings), ET-PKE200S (for low ceilings)

Projector Mount Base

ET-PKE200B

Replacement Lamp Unit

ET-LAE200

Replacement Filter Unit

ET-RFE200

Zoom lens

ET-ELW21 (Fixed-focus Lens), ET-ELW20 (Short Zoom Lens),

ET-ELT20 (Long Zoom Lens), ET-ELT21 (Ultra Long Zoom Lens)

Summary of Contents for PT-EW530E























































































































Search results

Summary of Contents for PT-EW530E

Reviews:

Related manuals for PT-EW530E

Brands by name

Popular brands

Panasonic PT-EW530E, Operating Instructions Manual

Search results

Summary of Contents for PT-EW530E

Reviews:

Related manuals for PT-EW530E

Brands by name

Popular brands