Panasonic PT-DS100XE ( ), Operating Instructions Manual

Page: 47 / 130

Basic operations using the remote control
ENGLISH -
47
Basic Operation
Basic operations using the remote control
Using the SHUTTER function
If the projector is not used for a certain period of
time during the meeting intermission, for example, a
shutter mode is available that allows the user to hide
images temporarily.
button
Press <SHUTTER> button on the 1 )
remote control or the main unit.
The projected light is blocked by the internal
z
shutter.
Press <SHUTTER> button again. 2 )
Projection resumes.
z
Note
The power indicator will flash while the SHUTTER
z
function is being used.
On-screen display function
This button electronically mutes the onscreen menus
to avoid disrupting the program.
button
Press <ON SCREEN> button on the
remote control.
Switching the input signal
You can use the remote control to switch the signals
that are being input and projected.
button
Press <INPUT SELECT> button on the
remote control or the main unit.
RGB1 Switches to RGB1 input.
RGB2 Switches to RGB2 input.
DVI-D/
HDMI
Switches to DVI-D or HDMI input.
If either of the inputs has already been
selected, the input switches to the
other.
VIDEO Switches to VIDEO input.
S-VIDEO Switches to S-VIDEO input.
SDI
Û
Switches to SDI input.
SDI: PT-DZ110XE/PT-DS100XE only :
Û
STATUS function
Pressing this button displays several pages of
projector status information.
button
Press <STATUS> button on the remote
control.
The [STATUS] screen will be displayed.
z
FUNCTION
ASPECT
SHUTTER
STATUS
AUTO SETUP
TEST PATTERN
ON SCREEN
INPUT SELECT
INPUT
SIGNAL NAME
SIGNAL FREQUENCY
PROJECTOR RUNTIME
LAMP1
LAMP2
INTAKE AIR TEMP.
OPTICS MODULE TEMP.
AROUND LAMP TEMP.
REMAINING FILTER
STATUS