40
- ENGLISH
Settings
Setting
Select [Setting] from the Main Menu (see “How
to operate menu” on page 33) and then select
the item from the Sub Menu.
Language
The language used in the On-Screen Menu is
available in
English, German, Spanish, French, Italian,
Dutch, Portuguese, Japanese, Simplified Chinese,
Polish, Korean, Russian, Swedish, Traditional
Chinese, Arabic, Norwegian and Turkish.
Press ▲▼ to select [Language].
1 )
Press ►
to display the language dialog
2 )
box.
Press ▲▼ to select the desired item
3 )
and press ► to choose.
Menu Location
Switch the menu location on the display screen.
Change order: Left Top
z
Right Top
Center
Left Bottom
Right Bottom.
Press ▲▼ to select [Menu Location].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ◄► to select the desired item.
3 )
Closed Caption
[Only for NTSC input].
Press ▲▼ to select [Closed Caption].
1 )
Press ►
to display the setting dialog box.
2 )
Press ◄► to select the desired item.
3 )
Off
Do not display Closed Caption.
CC1
Displays the CC1 data.
CC2
Displays the CC2 data.
CC3
Displays the CC3 data.
CC4
Displays the CC4 data.
Note
The closed caption is mainly used in the north America.
z
This function shows the text information contained in the
image signal. Captions may not be displayed on some
devices or software.
You can select [Closed Caption] only when NTSC signal
z
is input.
When Menu screen is displayed, the caption will not be
z
displayed.
Part of Closed caption may not be displayed when high
z
compensation values are set in [V Keystone].
VGA Out (Standby)
When in standby mode, choose whether to output the
signal from <COMPUTER 1> to <MONITOR OUT>
terminal.
Press ▲▼ to select [VGA Out (Standby)].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ◄► to switch [On]/[Off].
3 )
On
Output image signal from
<MONITOR OUT> terminal when the
projector is in standby mode.
Off
Image signal from <MONITOR OUT>
terminal can not be output when the
projector is in standby mode.
LAN (Standby)
Use this function to use network function when the
projector is in standby mode.
Press ▲▼ to select [LAN (Standby)].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ◄► to switch [On]/[Off].
3 )
On
LAN function is available when in
standby mode.
Off
LAN function is unavailable when
in standby mode.
