Ceiling mount bracket safeguards
74
- ENGLISH
Appendix
Dimensions
<Unit : mm(inch)>
367 (14.45)
357 (14.06)
133.7 (5.27)
241 (9.49)
267.6 (10.53)
231 (9.10)
186.7 (7.35)
163 (6.42)
98 (3.86)
334.7 (13.16)
(From reflection mirro
r
to cabinet rear edge)
(From mirror cove
r
to cabinet rear edge)
331.6 (13.01)
112.5 (4.43)
112.5 (4.43)
64.9 (2.55)
38.8 (1.53)
250.4 (9.76)
17 (0.67)
19.4 (0.76)
Actual dimension may differ by product.
:
Ceiling mount bracket safeguards
Installation work of the ceiling mount bracket should only be carried by a qualified technician.
z
Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused
z
by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental
conditions.
Remove an unused ceiling mount bracket promptly.
z
Ensure to use a torque driver and do not use an electrical screwdriver or an impact screwdriver.
z
For details, see the work instruction manual packed together with the ceiling mount bracket.
z
The model Nos. of the accessories and the parts sold separately are subject to change without notice.
z
Make sure the screws on the ceiling mount kit cannot touch the metal parts materials (metallic lath, wire or
z
board) in the ceiling board. Otherwise it may result in fire hazard.
Model No. of ceiling mount bracket:
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
Model No. of projector mount base:
ET-PKC200B
Model No. of Wall Mount Bracket:
ET-PKC200W
M4 x 0.7
8 mm (0.32")
Torque:1.2 ± 0.1 N · m
Bottom view
