LAN
ENGLISH -
51
Settings
The projector has a network fuction, and the following operations are available from the computer using the web
browser control.
Setting and adjustment of the projector.
z
Display of the projector status.
z
Transmission of an E-mail message when there is a problem with the projector.
z
This projector supports "Crestron RoomView" and the following application software from Crestron company.
(
Æ
page 55)
RoomView Express
Attention
Connects LAN to indoor equipment.
z
The positions of the <COMPUTER 1 IN> and <LAN> terminals are close each other. Therefore, when connecting cables to
z
both terminals, removing the cable connected to the <LAN> terminal may be difficult. When removing the cable connected
to the <LAN> terminal, remove the cable connected to the <COMPUTER 1 IN> terminal beforehand.
Note
A LAN cable is required to use the wired LAN function.
z
Computer
Projector
LAN cable (straight)
LAN cable (straight)
Hub
Connect to Network
A Web browser is required to use this function . Confirm that the Web browser can be used beforehand.
z
Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6/v10.7
Compatible Web Browser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)
Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be
z
used beforehand.
Use shielded LAN cable (STP cable) that is compatible with category 5 or above.
z
Use a LAN cable with length of 100m or shorter.
z
Name and function of network function parts
J
(1) LINK lamp (yellow)
Lights on when connected.
(2) LAN terminal (10BASE-T/100BASE-TX)
Used to connect the LAN cable here.
(3) ACT lamp (green)
Blinks when transmitting/receiving data.
(1) (2) (3)
