Panasonic PT-CW230E Operating Instructions Manual Download

Page: 23 / 79

ENGLISH -

Getting Started

Connections

Before connecting to the projector

Read carefully the instruction manual for the device to be connected.

Turn off the power switch of the devices before connecting cables.

If any connection cable is not supplied with the device, or if no optional cable is available for connection of the

device, prepare a necessary system connection cable to suit the device.

Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture.

In this case, a time base corrector (TBC) must be connected.

The projector accepts the following signals: VIDEO, S-VIDEO, analogue-RGB (with TTL sync. Level) and

digital signal.

Some computer models are not compatible with the projector.

When using long cables to connect with each of equipment to the projector, there is a possibility that the image

will not be output correctly unless a compensator is used.

For details on what video signals the projector supports, see “List of compatible signals”. (

pages 71-74)

Connecting example

Attention

When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between

the projector and the video deck.

If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the

projector and the video deck.

Note

When using an HDMI cable, check that it is compliant with the HDMI standard. Using a cable that is not compliant with the

HDMI standard may result in problems such as the image cutting out or not appearing.

When connecting the 1 080p signal using HDMI, use a cable compliant with 1 080p signal.

This projector does not support the Viera link (HDMI).

For the specifications of the RGB signals that can be applied from the PC, refer to “List of compatible signals”.

(

pages

71-74

)

See “Network operation” in the instruction manual on the supplied CD-ROM for the details of wired LAN communication

between the projector and the computer.

Computer

Audio system

Control computer

Video deck

(TBC built-in)

Blue ray disk player with HDMI

IN terminal

3D glasses

Summary of Contents for PT-CW230E
















































































Search results

Summary of Contents for PT-CW230E

Reviews:

Related manuals for PT-CW230E

Brands by name

Popular brands

Panasonic PT-CW230E, Operating Instructions Manual

Search results

Summary of Contents for PT-CW230E

Reviews:

Related manuals for PT-CW230E

Brands by name

Popular brands