Panasonic PT-CW230E Operating Instructions Manual Download

Page: 22 / 79

Setting up

- ENGLISH

Getting Started

Adjusting front adjustable feet

Lift the front of the projector and rotate the adjustable feet to a proper height and tilt.

You can turn the front adjustable feet to extend them. You can turn them in the opposite direction to contract

them.

(You can adjust the projection angle vertically.)

Attention

Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust

the front adjustable feet.

If keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Screen” menu. (

page 48)

Note

Screw up the adjustable feet, and an audible click will be heard as the limit.

Adjustable range:

1.0 degree

Summary of Contents for PT-CW230E
















































































Search results

Summary of Contents for PT-CW230E

Reviews:

Related manuals for PT-CW230E

Brands by name

Popular brands

Panasonic PT-CW230E, Operating Instructions Manual

Search results

Summary of Contents for PT-CW230E

Reviews:

Related manuals for PT-CW230E

Brands by name

Popular brands