Panasonic PT-AE4000 Functional Instructions Download

Page: 47 / 50

VIERA Link Connection

NGLISH - 47

Option menu

Select

VIERA LINK SETTINGS

in the

OPTION

menu for

the

VIERA Link

settings.

VIERA LINK

POWER ON LINK
POWER OFF LINK
STANDBY POWER SAVE
INTELLIGENT AUTO STANDBY

OFF

OFF
OFF

VIERA LINK SETTINGS

RETURN

SELECT

VERSION : HDAVI Control 4

Available Features

Easy playback

Automatic Input Switching - When the connected equipment is operated, input mode is switched automatically.

POWER ON LINK

Set POWER ON LINK “ON” in the Setup Menu to use this function.

When the connected equipment is turned ON, the projector which has been linked with the connected

equipment is automatically turned ON.

POWER OFF LINK

Set POWER OFF LINK “ON” in the Setup Menu to use this function.

When the projector is turned OFF and it is in standby mode, the connected equipment is also automatically

set to Standby.

This function will work even if the projector enters standby mode automatically by

SLEEP

function.

Reduce unnecessary power consumption in standby (STANDBY POWER SAVE)

Set STANDBY POWER SAVE “ON” in the Setup Menu to use this function.

The power consumption in standby mode of the connected equipment is lowered in synchronization when the

projector is turned OFF to reduce power consumption.

This function will work when

POWER OFF LINK

is set to

Auto standby for unnecessary equipment (INTELLIGENT AUTO STANDBY)

Set INTELLIGENT AUTO STANDBY “ON (WITH REMINDER)” or “ON (NO REMINDER)” in the Setup

Menu to use this function.

When the projector is ON, non-input selected connected equipment goes into standby mode automatically to

reduce the power consumption.

If you select

ON (WITH REMINDER)

, the on screen message will be displayed to be noticed before this

function is activated.

NOTE:

POWER ON LINK

Depending on the connected equipment, the projector might automatically turn ON when some functions of the

•

connected equipment are performed. (Only when the projector is in standby mode.)

Due to the projector’s characteristics, warm up time is needed before starting the projection, so please be aware that the

•

movie might have already started by the time the projector is fully lit.

POWER OFF LINK

Depending on the condition of the connected equipment, such as during recording, not all power of the connected

•

equipment will be switched off.

STANDBY POWER SAVE

Depending on the connected equipment, when the projector is turned on, even if the power consumption setting of the

•

connected equipment is set to the eco-standby mode, it’s power consumption is increased so it can startup faster.

INTELLIGENT AUTO STANDBY

This function may not work properly depending on the connected equipment. If required, set to

•

OFF

Summary of Contents for PT-AE4000



















































Search results

Summary of Contents for PT-AE4000

Reviews:

Related manuals for PT-AE4000

Brands by name

Popular brands

Panasonic PT-AE4000, Functional Instructions

Search results

Summary of Contents for PT-AE4000

Reviews:

Related manuals for PT-AE4000

Brands by name

Popular brands