PRODUCT INSTRUCTION
CAUTION:
This unit must be properly and securely mounted to a supporting
structure capable of sustaining the weight of the bracket and
camera assembly. Accordingly
1) The installation should be made by a qualified installer
2) The installation should be in compliance with local codes.
3) Care should be exercised to select suitable hardware to install
the unit, taking into account both the composition of the
mounting surface and the weight the hardware will be re
quired to sustain.
Be sure to periodically examine the unit and the supporting
structure to make sure that the integrity of the installation is intact.
Failure to comply with the foregoing could result in the unit
coming loose from the support structure and falling, with resultant
damages or injury to anyone or anything struck by the falling unit.
1) Remove the PVL1055 ceiling mount and PVL135 bracket from
there boxes.
2) Install bracket in the desired ceiling position with (4) bolts (not
included).
3) After the bracket is firmly attached to the ceiling, run all
necessary wiring through the provided hole on the side of the
bracket.
4) Direct the wiring through the bottom of the PVL135 bracket
and attach the PVL135 to the ceiling mount using the provided
hardware.
5) The next step is to attach the 1 ˚” pipe to the PVL135 bracket
and secure the housing to the pipe.
Qty
Part #
Description
A
1
30-VL1055
CEILING BRACKET
B
1
30-VL135
CEILING MOUNT SSIII
C
4
92-WSFL05
5/16 FLAT WASH SS
D
4
92-WSSL02
5/16 SPLIT LOCKWASHER SS
E
4
90-BTHH26
5/16X1 HEX HD. SS
F
1
Not Included
1 1/2" PIPE
Specification
Revision
Catalog
Number
Date
Section
INSTRUCTIONS
3028
0698
Brackets
MODEL:
PPMF12D
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
