- 164 -
The Camera Heads or the units whose images are to be displayed on the multi screen are set here.
∫
Multi screen setup tab [Multi-screen setup]
This item’s setting is reflected when the [Set] button is
pressed.
IP address
Enter the IP address or the host name of the Camera
Head or the unit whose image is to be displayed on the
multi screen.
With one group consisting of 4 cameras, up to four groups
of cameras (a total of 16 cameras) can be registered.
Enter as follows if the HTTP port number has been
changed.
Enter the following when connecting via HTTPS.
Factory settings:
Cam. 1 to Cam. 16: blank
≥
When connecting via HTTPS, install the security
certificate for the Camera Head or the unit to be
displayed. (
)
≥
When configuring a host name, the DNS settings of the
personal computer that will display the multi screen
must be configured. For details on the personal
computer’s DNS settings, consult your network
administrator.
Camera title
Enter the title of the Camera Head or the unit.
The camera title which has been input is displayed on the multi screen.
≥
You can enter between 0 to 20 half-size characters.
≥
The following characters can be displayed.
Factory settings:
Cam. 1 to Cam. 16: blank
≥
When a 16-screen multi screen is selected, camera titles may be only partially displayed.
≥
Multi screen displays are displayed in 4:3 aspect ratio.
Multi screen setup screen [Multi-screen]
Example of input
http://192.168.0.10:8080
Example of input
https://192.168.0.10/
Maximum number
of characters
1 to 128 half-size characters
Half-size numeric characters
0123456789
Half-size alphabetical
characters (upper and lower
cases)
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols
! # $ % ´ ( ) * + , - . / : ; = ? @ [ ] ^ _ ` { | } ˜ ¥
AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 164 ページ ２０１７年５月２２日 月曜日 午後６時１４分
