110
4.6.4.b.
Advanced Port Configuration
On the Rapid Spanning Tree Configuration Menu, pressing "A" opens the
Advanced Port Configuration screen, as shown in Fig. 4-47. On this screen, you can
configure the Spanning Tree advanced settings for each port.
PN28168 Local Management System
Rapid Spanning Tree Configuration -> Advanced Port Configuration
Port Trunk Link State Role Admin/OperEdge Admin/OperPtoP Migrat
---- ----- ---- ---------- ---------- -------------- -------------- ------
1 --- Down Forwarding Disabled False/False Auto /False Init.
2 --- Down Forwarding Disabled False/False Auto /False Init.
3 --- Down Forwarding Disabled False/False Auto /False Init.
4 --- Down Forwarding Disabled False/False Auto /False Init.
5 --- Down Forwarding Disabled False/False Auto /False Init.
6 --- Down Forwarding Disabled False/False Auto /False Init.
7 --- Down Forwarding Disabled False/False Auto /False Init.
8 --- Down Forwarding Disabled False/False Auto /False Init.
9 --- Down Forwarding Disabled False/False Auto /False Init.
10 --- Down Forwarding Disabled False/False Auto /False Init.
11 --- Down Forwarding Disabled False/False Auto /False Init.
12 --- Down Forwarding Disabled False/False Auto /False Init.
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set Port P-[t]o-P Status
[P]revious Page Restart Port [M]igration
Set Port [E]dge Status [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-47 Advanced Port Configuration
Screen Description
Port
Displays the port number.
Link
Displays the link status.
UP
The link has been established successfully.
DOWN
The link has not been established.
State
Displays the current port status.
Forwarding
Normal communication is executed based on the calculation
result.
Learning
Calculation is executed based on information.
Discarding
Calculation is not executed.
Role
Displays the role of the port in Spanning Tree.
Designated
Operating as a designated port.
Root
Operating as a root port.
Alternate
Operating as an alternate port.
Backup
Operating as a backup port.
Disabled
STP is not working.
Admin/
OperEdge
Displays the setting of the edge port (a port that can be immediately forwarded).
Admin: Administration displays the setting status, and Oper: Operation displays
the actual status.
True
Can be set to the edge port.
False
Cannot be set to the edge port.
